7.1.2 Service report output functions
The fax outputs service data setting status, past communications history reports.
a) List of service reports
The fax outputs the service reports shown below.
1. System data list
2. System dump list
Service activity report
(with service error code
and dump list)
Chapter 3: Maintenance & Service
In the service mode, select the #IO REPORT and the
desired numeric button 0 to 2.
Pressing buttons 1 to 2 outputs the respective service
reports on the left.
When pressing button 0, both are output.
If you set bits 0 and 1 of #I SSSW SW01 in the service
mode, the service error code and dump list are indicated
on the activity report (sending/receiving).