Canon MultiPASS C5000 Service Manual page 201

Part Printer
2:
2.4
Printing
The printer prints the fonts horizontally, and feeds the paper vertically
The printing design of the fonts are written into the font ROM*, and is usually made up of
360 dpi; 48 nozzles x 36 dots x 2 lines. Nozzles 49 to 60 and 113 to 124 are for spacing to next
line, and for IBM block graphic character printing. Nozzles 61 to 64 and 125 to 128 are not
used in printer mode*'..
The default character pitch in the horizontal direction is 10 cpi (characters per inch). The
default line feed pitch in the vertical direction is l/6 inch line feed (6 lpi).
then transmits them, the font image data in the ControVCG ROM cannot be used.
**Because there is no larger than l/6 inch line feeding in the printer mode. In the facsimile
mode, all 12%nozzles are used for printing.
mode, lOcpi, 116" line feed,
Character "A"
2-4