Canon MultiPASS C5000 Service Manual page 217

2:
Part Printer
5.3.2 Hexadecimal dump print
You can set the
receives print data from the computer, it converts and prints in the hexadecimal code.
You only need to set this function if you decode the print data from an application program
that does not send the print data correctly.
In this mode, each byte of data from the computer is printed as hexadecimal data in units of
16 bytes per line. Remaining data less than one line long are printed when the printer
mode is finished.
In order to output the hexadecimal dump print, you have to change the service data switch
settings in facsimile mode. In Service data - #7 PRINTER - 5. HEX DUMP MODE, select
Yes = (*I, then, when printer mode is entered, by selecting #4 DOS PRINTING with the
To stop the hexadecimal dump print select the #4 DOS PRINTING again, and go back to
facsimile mode, and select #7 PRINTER - 5. HEX. DUMP MODE No = (#I. Then, when you
return to the printer mode, normal printing is resumed.
7; 75 61 6C 69 74 79 2E 20 20 50 72 69 GE 74 20
66 61 73 74 2E 20 20 45 78 63 65 6C 6C 65 6E 74
20 6D 65 64 69 61 20 76 65 72 73 61 74 69 6C 69
74 79 2E 20 20 54 72 75 65 20 70 66 6F 74 6F 67
OD OA 72 61 66 69 63 20 71 75 61 6C 69 74 79 2E
77 61 72 65 20 63 6F 6D 70 61 74 69 62 69 6C 69
74 79 2E OD OA 45 76 63 65 6C 6C 65 6E 74 20 70
72 69 6E 74 20 71 75 61 6C 69 74 79 2E 20 20 50
72 69 6E 74 20 66 61 73 74 2E 20 20 45 78 63 65
61 74 69 6C 69 74 79 2E 20 20 54 72 75 65 20 70
20 73 6F 66 74 77 61 72 65 20 63 6F 6D 70 61 74
69 62 69 GC 69 74 79 2E OD 0.4 45 76 63 65 6C 6C
65 6E 74 20 70 72 69 6E 74 20 71 75 61 6C 69 74
79 2E 20 20 50 72 69 GE 74 20 66 61 73 74 2E 20
that prints the hexadecimal code data. Then, when the printer
printer so
it
63 65 6C 6C 65 6E 74 20 GDL-
Figure 3-1 Hexadecimal Dump Print (Sample)
r
Excellent
quality.
media versatili
atility.
lity.
3-6
print
Excellent
True photog
rahic quality.
Excellent soft
quality. P
True p
Excellent
Print fast.