Suzuki RM-Z250 Owner's Manual page 73

• Replace the spring.
SPRING/No.
Soft 51171-28H10
STD 51171-28H00
Hard 51171-28H20
• Tighten the lock nut 2.
NOTE:
Thread length a should be approx. 10 mm (0.39 in).
• Install the damper rod assembly. (4-85)
• Insert the push rod 4 into the inner rod.
shaped projection A of center bolt 5 into the
• Insert the
push rod B. (4-86)
Identification
SPRING RATE (Slit mark on
the spring end)
4.5 N/mm
(3-7)
(0.45 kgf/mm)
4.7 N/mm
(3-7)
(0.47 kgf/mm)
4.9 N/mm
(3-7)
(0.49 kgf/mm)
2 Lock-nut
a Approx. 10 mm (0.39 in)
MACHINE TUNING 3-9