Suzuki RM-Z250 Owner's Manual page 140

4-60 DISASSEMBLY AND ASSEMBLY
INSTALLATION
• Install the rear wheel, chain adjuster washers 1 and axle
shaft.
• Adjust the drive chain slack. (2-33)
• Tighten the rear axle nut 2 to the specified torque.
 Rear axle nut: 100 N·m (10.0 kgf-m, 72.5 lbf-ft)
REAR WHEEL SPOKES REPLACEMENT
(5-23)
A FWD
B Left
C Right