Suzuki RM-Z250 Owner's Manual page 96

4-16 DISASSEMBLY AND ASSEMBLY
• Remove the cylinder head base nuts C.
• Loosen the cylinder base bolt D.
• Remove the cylinder head bolts E.
NOTE:
When loosening the cylinder head bolts E, loosen each bolt lit-
tle by little diagonally.
• Remove the cylinder head F.
NOTE:
If the cylinder head does not come off easily, lightly tap it using a
plastic hammer.
• Remove the cylinder head gasket G, dowel pins H and cam
chain No.1 guide I.
NOTE:
Do not drop the dowel pins H and cam chain J into the crank-
case.