Suzuki RM-Z250 Owner's Manual page 149

• Remove the brake pad. (4-64)
• Remove the spring 7.
• Remove the caliper bracket 8 from the caliper 9.
• Remove the boots 0 and A.
• Remove the spring B.
• Remove the rear brake caliper axle bolt (bracket) C.
• Wrap the caliper with a rag to prevent brake fluid scatter and
piston pop-out.
• Apply low-pressure air into the caliper through the hole to
remove the piston.
Fingers can get caught between piston and caliper
body when removing the piston.
Do not place your fingers on the piston when remov-
ing the piston.
• Remove the dust seal D and piston seal E.
 CAUTION
DISASSEMBLY AND ASSEMBLY 4-69