Break-In (Running-In); When The Motorcycle Is New; When Engine Parts Are Replaced - Suzuki RM-Z250 Owner's Manual

BREAK-IN (RUNNING-IN)

WHEN THE MOTORCYCLE IS NEW

1) Warm up the engine before starting off.
2) Ride for 60 minutes using less than 1/2 throttle opening.
3) Ride for 60 minutes using less than 3/4 throttle opening.
NOTE:
* The break-in (running-in) period is the period of greatest wear.
* The bolts and nuts of the new machine can loosen quickly. Be
sure to retighten the bolts and nuts during the break-in (run-
ning-in) period.

WHEN ENGINE PARTS ARE REPLACED

Follow the same procedure when any of the following parts are
replaced:
• Piston
• Piston ring
• Cylinder
• Crankshaft
• Crankshaft bearing
A CLOSED
B 1/2
C FULL OPEN
GENERAL INFORMATION 1-7