DISK PLATE REPLACEMENT
• Remove the disk plate 2 by removing their bolts 1.
• Apply THREAD LOCK SUPER to the disk plate bolts 1.
99000-32110: THREAD LOCK SUPER "1322"
• Tighten the disk plate bolts 1 to the specified torque.
Disk plate bolt: 26 N·m (2.6 kgf-m, 19.0 lbf-ft)
REAR SPROCKET REPLACEMENT
• Remove the rear sprocket 2 by removing their bolts and nuts
1.
NOTE:
Install the rear sprocket as the letter on the sprocket surface
faces outside.
• Tighten the rear sprocket nuts to the specified torque.
Rear sprocket nut: 30 N·m (3.0 kgf-m, 21.5 lbf-ft)
or equivalent
DISASSEMBLY AND ASSEMBLY 4-59