Inspection; Oil Strainer (No.2) Installation - Suzuki RM-Z250 Owner's Manual

INSPECTION

• Check the oil strainers for any damage or clogging.
• If the oil strainer is clogging, clean the oil strainer with a com-
pressed air.
• Clean the oil nozzle by applying compressed air.

OIL STRAINER (No.2) INSTALLATION

• Install the oil strainer No.2 1 and tighten the oil strainer No.2
bolts 2 to the specified torque.
 Oil strainer No.2 bolt: 5.5 N·m (0.55 kgf-m, 4.0 lbf-ft)
• Install the oil pump No.2 cover 3 and tighten the oil pump
No.2 bolts 4 to the specified torque.
 Oil pump No.2 bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Install the magneto cover. (4-53)
• Install the gearshift lever.
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (2-13)
A Oil strainer No.1
B Oil strainer No.2
PERIODIC MAINTENANCE 2-17