Suzuki RM-Z250 Owner's Manual page 85

• Remove the clutch cable bracket bolt Q and disconnect the
clutch cable R.
NOTE:
Loosen the clutch cable adjuster when disconnecting.
• Remove the throttle body S. (4-45)
• Remove the ignition coil/plug cap T. (2-7)
• Remove the cotter pin U, washer V and clip W.
• Remove the master cylinder rod pin X.
• Remove the brake pedal pivot bolt Y and return spring Z.
• Remove the kick starter lever \ by removing its bolt [.
DISASSEMBLY AND ASSEMBLY 4-5