3-2 MACHINE TUNING
SELECTION OF ECM TUNING MAP
In the ECM of this model, there are three different maps pro-
vided, a standard map and two modified maps (injection map for
slightly leaner mixture and that for slightly richer mixture).
Select the appropriate short wire among those that come sup-
plied with the motorcycle and connect it to the mode select cou-
pler. This can change the ECM setting to the modified map
(either injection map for slightly leaner mixture or that for slightly
richer mixture depending on the selected shunt wire).
Coupler color
1
White
2
Gray
NOTE:
The changeover is executed immediately after the engine has
been started.
• Select White short wire (map for slightly leaner mixture) when:
1) Raining
2) In high humidity
• Select Gray short wire (map for slightly richer mixture) when:
1) In low humidity
2) At continuous high speed
NOTE:
The above information is provided only as a guide. To determine
the setting, make sure to check also for driveability and spark
plug firing end condition.
Injection map
Lean
Rich