Handlebar Set-Up - Suzuki RM-Z250 Owner's Manual

5-22 SERVICING INFORMATION

HANDLEBAR SET-UP

1
Throttle cable (Pulling cable)
2
Throttle cable (Returning cable)
A
Marking
B
Forward
a
145 mm (5.71 in)
*1 Align the matching surface of master cylinder with marking.
*2 Align the matching surface of clutch lever holder with marking.
*3 Tighten the lever side bolt first.
*4 Align the matching surface of throttle case with marking.
*5
Align the " " mark on the left handlebar grip with marking.
*6 Apply adhesive to the handlebars and inner of left handlebar grip.
*7 Set the velcro of handlebar pad to backward.
*8 Align the matching surface of handlebar holder with marking.
b
190 mm (7.48 in)
c
2 – 3 mm (0.08 – 0.12 in)
d
121 mm (4.76 in)
e
175 mm (6.89 in)
f
14 – 16 mm (0.55 – 0.63 in)