Troubleshooting; Overview; Troubleshooting Installation - Power Computing PowerCenter PRO User Manual

Table of Contents

Advertisement

T r o u b l e s h o o t i n g

Overview

This section addresses possible sources of problems. If you are having diffi-
culty using or installing CD-ROM ToolKit, read through the relevant section
in the manual first, then consult this section.

Troubleshooting Installation

At the restart following installation, if the CDT Extension icon briefly
appears with an "X" on top of it (Figure 7), a startup error has occurred:
CD-ROM ToolKit did not load properly.
If you have this problem
1. Disable other System Extensions.
Pay particular attention to Extensions with CD or CD-ROM in their
names. Remove them from your System Folder or use an Extension
management program to make them inactive.
2. Restart your Macintosh.
3. Check the Extension icons at startup. If CDT loads without the "X,"
you have isolated the conflicting Extension.
Chapter 4: Troubleshooting
Figure 7. Problem startup icon
4
185

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerbase low-profilePowerbase minitower

Table of Contents