Power Computing PowerCenter PRO User Manual page 92

Installing PCI Expansion Cards
2. If the thumb screws are in too tight to remove by hand, use a small
coin or a flat-bladed screwdriver to loosen the screws.
Put the thumb screws somewhere safe where you'll be able to find them
when you're ready to replace the cover.
3. Gently, but firmly, pull apart the bottom corners of the cover, pull
the cover toward you slightly, lift it off and set it aside.
62
PowerCenter Pro User's Guide
cover
thumb screws
thumb screws
For Technical Support, Call 1-800-708-6227
chassis