How To Use Cdt Remote; Overview - Power Computing PowerCenter PRO User Manual

H o w T o U s e C D T R e m o t e

Overview

Some initial facts
CDT Remote is designed to look like a standard remote control for a home
stereo. To use it you need the following:
The Apple CD Audio Player may conflict with CDT Remote and prevent it from operating
NOTE
correctly. The Installer tries to disable it. If you still have problems with it, you may want to copy
it to a diskette for safe keeping and remove it from your system. Apple CD Audio Player is
usually stored in the Apple Menu Items folder in your System Folder. If you don't find it there,
use Find File to locate it.
Chapter 3: How To Use CDT Remote
Requirement
Sound output
Enabled CD-ROM device driver
Enabled Sound in the Control Panels
This pertains only to internal CD-ROM drives
with internal speakers connected internally.
Table 6:
Detail
• headphones plugged into your CD-ROM drive
• external speakers plugged into your CD-ROM drive OR
• for internal CD-ROM drives: internal speakers connected
internally
CD-ROM ToolKit comes with a high performance device driver, see
Chapter 4 for more information.
1. Open the Sound Control Panel.
2. Click on the Alert Sounds popup menu and select Sound In.
3. Make sure Built In is selected.
4. Click on the Options ... button.
5. Choose Internal CD as your input source.
6. Enable the Playthrough checkbox.
7. In Sound Out, select an output device and specify 16 bit,
Stereo, and 44.100kHz
3
179