Double-clicking on a CD-ROM drive in the Devices List will also take you to Setup.
NOTE
Figure 1. CD-ROM ToolKit Drive Setup features screen: Cache
1
2
3
Chapter 2: How To Use CD-ROM ToolKit
1
Setup feature
Many options within the Setup features are controlled by checkboxes. These act as toggle switches to enable or disable feature
options. You control the toggling by clicking on the box.
• A checked box means the option is enabled.
• An unchecked box means the option is disabled.
The banner at the top of the Setup Features screen lists the name of the drive you are setting up.
MouseHelp is available in Setup Features. Use your mouse to point to an option you want to know more about. Information
pops into the box at the lower section of the screen. Activate MouseHelp by selecting it from the Help menu in the Menu bar.
2
4
]
3
171