Removing A Dimm - Power Computing PowerCenter PRO User Manual

Adding Memory

Removing a DIMM

1. If you need to remove a DIMM module to make room for a higher-
capacity one, reach in and push down on the tiny lever at the end of
the DIMM slot.
A. push
2. The DIMM should pop loose from the slot at the lever end.
3. If the DIMM module does not come free, press the DIMM lever down
again.
4. Grasp the DIMM module with one hand at each end and rock the
module up and out of the slot by pulling first on one end and then
the other.
5. When you are finished with DIMM removal and insertion, replace
the cover and reconnect external cables to your computer.
CAUTION: Be careful not to get any cables caught in the cover or the fan
housing when you put it back on the computer.
80
PowerCenter Pro User's Guide
lever
lever
down
B. rock DIMM out
For Technical Support, Call 1-800-708-6227