Power Computing PowerCenter PRO User Manual page 130

Installing Internal Drives
6. Slide the drive into the drive bay (inserting a drive into a 5.25-inch
drive bay from the front is illustrated below), being careful not to
crimp or fold any cables. The drive slides into the bay, and the four
threaded holes in the sides of the drive (two on each side) should
line up with the screw slots in the side of the bay.
Install the drive so that it faces up; if it isn't clear which way the drive
should face (e.g., hard drives), assume that the connectors should be in
the back and that the SCSI connector key should face up.
100
PowerCenter Pro User's Guide
For Technical Support, Call 1-800-708-6227