4. Remove the four large thumb screws from the rear of the computer
cover.
If the thumb screws are in too tight to remove by hand, use a small coin or
a flat-bladed screwdriver to loosen the screws.
Put the thumb screws somewhere safe where you'll be able to find them
when you're ready to replace the cover.
5. Gently, but firmly, pull apart the bottom corners of the cover, pull
the cover toward you slightly, lift it off and set it aside.
For Technical Support, Call 1-800-708-6227
cover
PowerCenter Pro User's Guide
Installing Internal Drives
thumb screws
chassis
thumb screws
93