How To Remove The Cover - Power Computing PowerCenter PRO User Manual

Adding Memory
CAUTION: If an anti-static grounding strap was supplied with the RAM
you are installing, put it on and ground it as directed by the instructions
before touching any components inside the computer.
CAUTION: Never turn the computer on or operate the computer with the
cover removed.

How to remove the cover

1. Shut down the computer and turn off the monitor, but leave the
computer plugged in to the electrical outlet.
Leaving the computer plugged in ensures that it is grounded.
2. If the monitor is on top of the computer, disconnect it if necessary,
and set it aside.
3. Disconnect everything but the power cord from the back of the
computer.
4. Rotate the computer so that its back panel faces you.
5. Remove the screws and the cover as follows:
If you have a Minitower chassis
1. Remove the four large thumb screws from the rear of the computer
cover.
72
PowerCenter Pro User's Guide
For Technical Support, Call 1-800-708-6227