Power Computing PowerCenter PRO User Manual page 108

Adding Memory
DIMMs can be inserted in any order.
All DIMMs must be 168-pin, fast-paged mode, 60-nanosecond RAM access
time or faster. Make sure that the memory modules you purchase are the right
ones for your computer. You can install 8 MB, 16 MB, 32 MB, or 64 MB DIMMs
up to a total capacity of 256 MB.
To increase your system's RAM, install additional DIMM modules in vacant
DIMM slots; if there are no vacant slots, remove one or more lower-capacity
DIMMs (see Removing a DIMM on page 80) and replace them with modules of
higher capacity (see Inserting a DIMM on page 81).
CAUTION: If you are not proficient with electronic equipment, Power
Computing Corporation recommends that you have a certified technician
install RAM. If you attempt to install RAM yourself, any damage you may
cause to your equipment will not be covered by the limited warranty on
your computer. Please call technical support at 1-800-708-6227 for
additional information about this or any other warranty question.
CAUTION: If an anti-static bracelet is available, put it on and ground it to
your computer before touching any components inside the computer.
CAUTION: Handle DIMMs by the ends and avoid touching their contacts
or other metal components.
CAUTION: Always store DIMMs in static-resistant bags.
Take your time; don't hurry.
78
PowerCenter Pro User's Guide
For Technical Support, Call 1-800-708-6227