Power Computing PowerCenter PRO User Manual page 97

3. Remove the metal slot cover from the back of the chassis for the slot
you want to use.
Remove the slot cover screw at the top of the slot cover and put it
somewhere you will find it later; then pull the slot cover toward you so that
the tongue at the bottom of the cover slides out of the groove in the
chassis.
slot cover
screw
4. Remove the card from its static-proof bag.
Hold the card by its non-metallic edges and its metal bracket to avoid
touching components or contacts on the board.
For Technical Support, Call 1-800-708-6227
slot cover
Installing PCI Expansion Cards
groove
tongue
PowerCenter Pro User's Guide
67