Power Computing PowerCenter PRO User Manual page 215

4. You may find that renaming the conflicting Extension so that it follows
CDT alphabetically will solve the problem. Sometimes changing the
order that Extensions load is all that's needed. Extensions normally
load in alphabetical order. In some cases, Extensions are named with a
space preceding the name to make them load first.
CD-ROM ToolKit will display a question mark on top of its icon (Figure 8) at
startup under the following circumstances:
• It has not been configured to support any CD-ROM drives, or
• Your CD-ROM drive is not recognized by CD-ROM ToolKit (check the
Supported Devices list in the CDT application folder)
Typical reasons for this include:
• You have a newer drive that is not yet supported by CD-ROM ToolKit.
• You have an older, discontinued drive.
• Your drive was not powered on at startup.
• There is a conflict with another Extension.
• You did not remove old CDT software at installation.
• You do not have enough memory to load CDT.
• You have a problem on the SCSI bus, and the computer does not
recognize the drive (this may be due to a bad SCSI ID, a bad cable, or
improper termination).
186
Figure 8. Missing device startup icon
CD-ROM ToolKit Reference Guide