Install Software Drivers - Power Computing PowerCenter PRO User Manual

Installing Internal Drives
9. If you are installing a Zip™ drive, use the small 4 wire 4-pin power
connector and plug it into the keyed 4-pin connector near the left
end of the rear of the Zip drive.
On some systems the small power connector is prewired into the power
cables; on others you plug an adapter into the large power cable socket to
get the small connector.
Zip drive
4-pin Zip
drive
power
connector
Make sure the connectors are snug.
10. Re-insert the speaker in the bezel and replace the bezel.
11. Replace the cover, reconnect system components, turn main power
back on, and restart the computer.
CAUTION: Be careful not to get any cables caught in the cover or the fan
housing when you put it back on the computer.

Install software drivers

Some SCSI devices require special software called device drivers to operate
with your computer. If a device driver is required, it is normally supplied
with the device; if you are unsure whether one is required, contact the
102
PowerCenter Pro User's Guide
SCSI
connector
For Technical Support, Call 1-800-708-6227