Power Computing PowerCenter PRO User Manual page 99

6. Push the card into the slot until it is firmly seated.
Do not force the card. If you feel a lot of resistance, pull the card out,
realign it, and insert it again.
• The tongue and screw hole on the slot cover should line up with the
• Replace and tighten the screw you removed from the slot cover.
7. If your system is a Minitower, replace the base.
8. Replace the computer cover, tighten the thumb screw(s), and re-
connect everything.
CAUTION: Be careful not to get any cables caught in the cover or the fan
housing when you put it back on the computer.
WARNING! To prevent electrical shock, always replace the cover before turning on
the computer.
For Technical Support, Call 1-800-708-6227
slot and the screw hole on the chassis.
Installing PCI Expansion Cards
PowerCenter Pro User's Guide
69