Power Computing PowerCenter PRO User Manual page 83

Easy install
In most cases, you will want to do an easy install when re-installing system
software. This allows the computer to determine which components are
appropriate for your computer and install them for you. The easy install is the
default of the system software installer.
To perform an easy install from the Software Installation screen:
1. Review the list of software components to make sure they are the
ones you want installed.
2. Click on the "Start" button in the lower right corner to install the
software.
3. Follow the on-screen instructions for completing the system
software installation.
Custom install
The system software installer also allows you to install specific categories or
pieces of system software without having to re-install all the system software.
For example, using the custom install option, you can re-install a general class
of software such as Cyberdog or QuickDraw GX.
A custom install is most often used to replace a specific component of
corrupted or missing software, or to add specific functionality to your system.
To perform a custom install from the Software Installation screen:
1. Select or deselect any of the components shown in the list labeled
"Optional Software."
2. When you have selected the software components you want, click
on the "Start" button in the lower right corner to install the
software.
3. Follow the on-screen instructions for completing the system
software installation.
For Technical Support, Call 1-800-708-6227
Troubleshooting
PowerCenter User's Guide
53