Power Computing PowerCenter PRO User Manual page 104

Adding Memory
4. Gently place it on its left (as viewed from the rear) side and rotate it
so that the base faces you.
5. If you have a Minitower chassis, remove the four Phillips-head
screws from the corners of the base and put them where you will be
able to find them later.
These Phillips-head screws are for the base only; don't use the Phillips
screws for the cover, or the thumb screws for the base.
Phillips-
head screws
6. Remove the Minitower base and set it aside.
74
PowerCenter Pro User's Guide
For Technical Support, Call 1-800-708-6227