How To Remove The Cover - Power Computing PowerCenter PRO User Manual

CAUTION: Never turn the computer on or operate the computer with the
cover removed.

How to remove the cover

1. Shut down the computer and turn off the monitor, but leave the
computer plugged in to the electrical outlet.
Leaving the computer plugged in ensures that it is grounded.
2. If the monitor is on top of the computer, disconnect it if necessary,
and set it aside.
Otherwise it's going to be awkward to remove the computer cover.
3. Disconnect everything but the power cord from the back of the
computer.
4. Rotate the computer so that its back panel faces you.
5. Remove the screws and cover as follows:
If you have a Minitower chassis
1. Remove the four large thumb screws from the rear of the computer
cover.
For Technical Support, Call 1-800-708-6227
Installing PCI Expansion Cards
PowerCenter Pro User's Guide
61