Power Computing PowerCenter PRO User Manual page 36

Getting Started
To connect the video cable:
1. If necessary, attach the video cable to the monitor.
Some monitors have video cables permanently attached.
2. Connect the video cable to the monitor port on the back of the
computer.
There are two types of built-in video port connectors on the back of your
computer: Macintosh-standard and VGA.
built-in Macintosh-
standard video port
Connect your monitor to the appropriate port for your monitor. The on-
board video automatically senses which port you are using.
CAUTION: Do not connect monitors to both built-in video ports
simultaneously. The internal video card will support only one output
type at a time.
6
PowerCenter Pro User's Guide
built-in VGA
video port
For Technical Support, Call 1-800-708-6227