Quick Start; Installing Cd-Rom Toolkit - Power Computing PowerCenter PRO User Manual

Q u i c k S t a r t
This chapter provides a minimal outline for how to install CD-ROM ToolKit.
Since CD-ROM Toolkit comes installed on your startup drive, you should not
have to install it unless it has become damaged or been deleted
In the online manual found on the P o w e r C D in the Bundled Software folder
under CD-ROM Toolkit, you will find a complete guide to installation in the,
CD-ROM Toolkit User Guide, in Chapter 3, Installing CD-ROM ToolKit.
If the system software has been damaged or the startup disk has been replaced,
you should go to the S y s t e m S o f t w a r e I n s t a l l e r s folder on the P o w e r
CD and follow the instructions there to re-install the system software

Installing CD-ROM Toolkit

What follows is a quick start version of the installation instructions. For more
detail on installing CD-ROM toolkit, consult the online CD-ROM Toolkit
User's Guide, Chapter 3, Installing CD-ROM Toolkit.
To install CD-ROM Toolkit software:
1. Restart your computer with extensions and virus protection off (by hold-
ing down the Shift key).
2. Turn off all virus protection software.
3. Insert the Power CD in the CD-ROM drive and close it.
4. Double-click on the P o w e r C D icon.
5. Double-click on the S y s t e m S o f t w a r e I n s t a l l e r s folder.
6. Double-click on the C D - R O M S o f t w a r e folder.
7. Double-click on the C D S o f t w a r e T o o l k i t I n s t a l l e r icon.
8. Click Continue on the opening Installer screen.
Chapter 1: Quick Start
1
167