Power Computing PowerCenter PRO User Manual page 84

Troubleshooting
Clean install
A clean install of the system software disables the existing System Folder, re-
naming it "Previous System Folder", and creates a fresh System Folder on the
hard drive. A clean installation of the system software does not delete or erase
any of the software on your hard drive. Performing a clean install should
resolve Mac OS system software problems.
To perform a clean install from the Software Installation screen:
1. Select or deselect any of the components shown in the list labeled
"Optional Software."
If you are doing a clean install, you must select "Mac OS 7.6" and "FWB
CD-ROM Toolkit."
2. Click on the "Options" button on the lower left side of the Software
Installation screen.
3. The options screen will present a dialog box with an option, "Create
new System Folder."
The options screen may also present a dialog box with an option "Check
Destination Disk" if you want to check and repair the installation disk
before installing the software.
4. Click on the "Create new System Folder." box in the upper left
corner of the dialog box.
If you have reason to suspect that there may be disk problems, click on the
"Check Destination Disk" box if it is available.
5. Click on the "OK" button in the lower right corner of the dialog box.
54
PowerCenter User's Guide
For Technical Support, Call 1-800-708-6227