Appendix 3 Configure The Wireless Router - Digisol DG-SC6820VPIE User Manual

Appendix 3 Configure the Wireless Router

The wireless router is mainly used to Internet access and wireless coverage. A
wireless router needs to be deployed in order to use the Wi-Fi function of IP Camera. User
need to find the wireless router's user name, password and IP, connect your PC to
wireless router before you use it. In general, the router's IP is "192.168.1.1", user name
and password are "admin", and user can also find them in wireless router's instruction.
The following example for DG-BR4000N/E Wireless Router shows the configuration
steps of wireless router.
1. Network parameters setup for wireless router
Enter your wireless router's IP in browser to pop up login screen, fill in the user name
and password to enter into the router's configuration page, then switch to the "LAN
Setting" page under "network parameter" menu, set the IP of wireless router, as shown in
Fig 5-4:
2. Turn to the "basic settings" page under "wireless parameters" menu, as shown
in Fig 5-5:
(1) Set SSID
This SSID is for identity validation of wireless network, it must be the same as the
SSID setting of IP Camera.
(2) Frequency range
It determines the frequency range of network working; select range: 1~13, the default
value is 6.
IP Camera User Manual
Fig 5-4
73