Table of Contents
Advertisement
address from the router, and revert to manual IP automatically when DHCP failed.
[IP Address]: Set the IP Camera's IP address.
[Net mask]: Default value is 255.255.255.0 (users are recommended not to change it).
[Gateway]: Set the IP Camera's gateway. When the device is connected to public network
via a router, gateway should be set to the router's IP.
[Multicast address]: Multicast means the hosts of a group can receive all the data within
this group. Set the IP address and port number of multicast.
[DNS Server]: The default server is the DNS address of Guangdong province. Using
DDNS function outside this area need to set the DNS address as their local DNS address.
Click OK button to save the setting; when the setting is not saved, click "Refresh"
button to return to the previously saved parameters; when the setting has been saved,
click "Refresh" button to query whether the setting is successful.
Note: After modify and save network parameters, IP Camera will
restart. If the device is applied in LAN, please avoid conflict with the IP
addresses of other devices or PC.
3.5.2 Stream Configure
The interface of stream configure is shown in Fig 3-10:
[Stream ID]: Support three types of stream: main stream is HD channel, sub stream is SD
channel, and mobile stream is throttle channel.
[Stream type]: Includes Only Video and Video & Audio.
[Encode type]: Support the standard H.264 video encoding.
[Frame rate]: Set the encoding frame numbers per second. The adjustable range
synchronizes with stream ID.
[Frame interval]: The smaller frame interval, the higher image bitrate and the better
image quality you get.
[Resolution]: Set the resolution of image. It can be set as 960P, 720P in the main stream;
CIF, D1, VGA in the sub stream; and QCIF in the mobile stream.
[Bit type]: CBR adopts constant encoding bitrate, VBR adopts variable encoding bitrate.
IP Camera User Manual
17
Advertisement
Table of Contents
