Configure Skyros Iview - Digisol DG-SC5800PI User Manual

Auto Focus
Cruise control

5-1 Configure SKYROS iView

Before you can use SKYROS iView, you must configure at least 1 IP camera.
To enter configuration menu, click 'Configuration' button
main menu as shown below:
The configuration menu will appear. There are 6 sub menus in the configuration
menu:
 Device (Add or remove IP camera / video server)
 Recording (Configure video recording)
 System (Configure system wide settings)
Click + or – to adjust the focus.
This function is only available for supported cameras.
Click 'Go' button to start camera cruise and click 'Stop'
button to stop cruise. This function is only available for
supported cameras.
79
DG-SC5800PI User Manual
in SKYROS iView