Table of Contents
Advertisement
Step 4: Select your wireless router, and set up the WEP key and password, click [Connect]
button.
Note: If the router's security type is Auto, user can click [Connect] directly
without setting parameters; if the security type is WPA, user need to enter password
and then click [Connect]; if the security type is WEP, user need to set the WEP key
format, WEP key and password, then click [Connect]. These settings must be
consistent with wireless router.
Step 5: When the connect state is displayed as "Connect", unplug the network cable of IP
Camera, open IE browser and enter the wireless IP to access IP Camera.
Click OK button to save the setting; when the setting is not saved, click "Refresh"
button to return to the previously saved parameters; when the setting has been saved,
click "Refresh" button to query whether the setting is successful.
Note: Only for the models with WiFi function. If your IP Camera has no
WiFi function, searching router is invalid.
3.5.10.4 PPPoE Configure
The interface of PPPoE configure is shown in Fig 3-24:
[Enable]: Enable or disable PPPoE dial-up function.
IP Camera User Manual
Fig 3-24
33
Advertisement
Table of Contents
