Table of Contents
Advertisement
IP Camera User Manual
3.3.1 Video Control
[Stream ID]: Select the stream according to the network environment: main stream is HD
channel, sub stream is SD channel, and mobile stream is throttle channel.
[Protocol]: Support TCP, UDP network protocol.
[Play]: Click this button to open the current video screen.
[Stop]: Click this button to close the current video screen.
[Record]: Manual recording switch. Click this button to record current video, and save
them in AVI format to "Local recording files path" of local configure; the state is changed to
after enable recording, click this button to stop recording.
[Capture]: Click this button to snap current image, and save it in JPG format to "Local
capture files path" of local configure.
[Talkback]: Audio talkback switch. Click this button to perform the talkback between PC
and IP Camera; the state is changed to
after enable audio talkback, click this
button to stop talkback.
[Show Alarm]: Click this button to pop up alarm information list, it shows the alarm IP,
alarm time and alarm description.
[Audio]: Open or close the sound of live video.
[Use Buffer]: In order to avoid the stagnation caused by network congestion during video
playback, using buffer function can save a certain amount of data (150/800/1500/3000ms)
before playing video. The longer buffer time you set, the longer delay video plays.
[Full Screen]: Double-click the video screen to display video in full-screen, double-click
again or press Esc key to exit full screen mode.
[Video Parameters]: Adjust the brightness, hue, contrast, saturation and sharpness of
video, click [Default] button to restore default values.
Note: Support 5 users online at the same time.
12
Advertisement
Table of Contents
