4.4
IP Camera behind a router/firewall – Sample Configuration
If this IPCAM is not directly connected to Internet (behind router or firewall),
you'll need to setup your router / firewall so you can access this IPCAM from
other computers on Internet.
The following instructions describe how to configure your router or firewall
device so that IPCAM can work with them. These instructions are based on a
commonly-available residential router and these setup techniques should be
easy to apply on any other similar devices as well.
4.4.1 Setup Dyndns Dynamic IP address Mapping
Go to your router's setup page, and locate 'DDNS', 'Dynamic DNS', or
1.
similar setup items.
2. Refer to last chapter
and domain name.
DG-SC2600/DG-SC2600W User Manual
(Sec
4.3) and obtain a Dyndns account, password,
104