Digisol DG-SC6820VPIE User Manual page 83

Users can set up DDNS domain name service, please refer to Appendix 4 for DDNS
settings. Enter the username and password applied in the DDNS server into the [DDNS
Configure] page, and map the ports from router. The router judges and points to IP
Camera according to the different ports, remote Internet users can visit the IP Camera on
the network via domain name.
Login IE and enter the domain name and port number, and without entering port
number if it is the default value "80", for example: http:// MyIPC.no-ip.org:2318.
 PPPoE dial-up access
For IP Camera dial-up access, see picture below for the network topology:
Setup steps:
Step 1: Login IP Camera via crossover cable direct connection; (Refer to Appendix 8)
Step 2: Set PPPoE parameters; (For more details, please refer to [PPPoE Configure])
Step 3: Connect IP Camera to Internet;
Step 4: After user successfully set up DDNS service, you can visit IP Camera on the
network via domain name.
IP Camera User Manual
Fig 5-17
Fig 5-18
82