Appendix 2 SearchTool User Guide
1. Introduction
Software "SearchTool" can search for IP Cameras on the intranet automatically, and
doesn't need the IP address to configure equipment.
2. Search online equipment
After installed the software "SearchTool", double-click the shortcut to enter main
interface of software, click Search
intranet, as shown in Fig 5-1:
3. Configure parameters of online equipment
Double-click a device in the list to pop up the Configuration dialog box. It can modify
the network parameters, restore defaults, and restore the factory settings, as shown in Fig
5-2:
Click IP address of device in the list to enter into the IE login screen.
IP Camera User Manual
button to search online equipment on the
Fig 5-1
70