Table of Contents
Advertisement
SD card.
Don't allow formatting during the process of using SD card (capture or
record).
Don't cut off the power in the process of formatting.
FAT32 is used to file system format by default.
IP Camera doesn't support the storage formatted into multi-partition, if user
want to format SD card on PC before using, please format it into one
partition.
3.5.7 PTZ Configure
The interface of PTZ configure is shown in Fig 3-15:
[PTZ configure]: When IP Camera is connected to RS485 communication or control
device (e.g. PTZ decoder, dome camera), user need to select the correct PTZ settings
according to the parameters of external communication device (address, protocol, baud
rate, etc).
Click OK button to save the setting; when the setting is not saved, click "Refresh"
button to return to the previously saved parameters; when the setting has been saved,
click "Refresh" button to query whether the setting is successful.
IP Camera User Manual
Fig 3-15
23
Advertisement
Table of Contents
