Table of Contents
Advertisement
3.5 Configure
Click [Configure] button to enter the parameter setting page.
3.5.1 Network Configure
The interface of network parameters is shown in Fig 3-9:
[Device Port]: Default value is 5000 (users are recommended not to change it).
[Web Port]: Default value is 80 (users are recommended not to change it).
[RTSP Port]: Default value is 554 (users are recommended not to change it).
[ONVIF Port]: Default value is 12001 (users are recommended not to change it).
[DHCP]: If DHCP function of router is enabled, IP Camera will automatically obtain IP
IP Camera User Manual
Fig 3-9
16
Advertisement
Table of Contents
