Table of Contents
Advertisement
IP Camera User Manual
Notice: Only setting the correct parameters and protocol can you
control the external communication device.
3.5.8 Record Configure
The interface of record configure is shown in Fig 3-16:
Fig 3-16
[Storage rule]：When the storage space is full, "Circle write" will cover the earliest storage
files and keep recording, "Not overwrite" will stop recording and generate alarm
automatically.
[Pre-recording]: Alarm signal needs a little time to process and trigger recording, it may
not record some important information before alarm activation. This function can save
pre-recording (usually is 6~7s) and improve monitoring reliability, otherwise it only writes
the current video data to SD card.
[Stream ID]: The smaller record stream you set, the more video files stored in SD card.
Select the stream for recording: main stream is HD channel, sub stream is SD channel,
24
Advertisement
Table of Contents
