1. Manuals
  2. Brands
  3. Digisol Manuals
  4. IP Camera
  5. DG-SC5800PI
  6. User manual

Digisol DG-SC5800PI User Manual

Megapixel outdoor bullet poe ip camera with ir led and ir-cut filter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
 
 
 
 
 
DG-SC5800PI
Megapixel Outdoor Bullet PoE IP Camera
with IR LED and IR-cut Filter

User Manual

 
 
V2.0
2013-06-05
As our products undergo continuous development the specifications are subject to change without prior notice

Advertisement

Table of Contents
loading

Related Manuals for Digisol DG-SC5800PI

Summary of Contents for Digisol DG-SC5800PI

  • Page 1: User Manual

              DG-SC5800PI Megapixel Outdoor Bullet PoE IP Camera with IR LED and IR-cut Filter User Manual     V2.0 2013-06-05 As our products undergo continuous development the specifications are subject to change without prior notice...
  • Page 2 Trademarks: DIGISOL™ is a trademark of Smartlink Network Systems Ltd. All other trademarks are the property of the respective manufacturers. Safety This equipment is designed with the utmost care for the safety of those who install and use it.

  • Page 3: Interference Statement

                                                                               DG-SC5800PI User Manual   Federal Communication Commission Interference Statement FCC Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limitations are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Fcc Caution

                                                                               DG-SC5800PI User Manual   FCC Caution This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

  • Page 5: Table Of Contents

                                                                                                                  DG-SC5800PI User Manual INDEX 1. Product Information....................... 8 1‐1 Product Introduction ....................... 8 1‐2 Safety Information......................9 1‐3 System Requirements....................10 1‐4 Package Contents ......................10 1‐5 Get Familiar with your new Network Outdoor Bullet IP Camera ........11 1‐6 Installation of the Network IP Camera ................15 2. Using Network IP Camera by Web Interface ..............18 2‐1 Locate the IP address of Network IP Camera ..............18 2.2 Connect to IP camera’s Web User Interface ..............20 2‐3 Viewing Live Video ......................24 2‐4 Client Settings........................ 27 3. Advanced Configuration ....................28 3‐1 System ...........................
  • Page 6                                                                                                               DG-SC5800PI User Manual 3‐6 Audio ..........................45 3‐7 Motion........................... 46 3‐8 PTZ Control ........................48 3‐9 Event..........................50 3‐9‐1 Settings........................51 3‐9‐2 Media ........................53 3‐9‐3 Event Server ......................54 3‐10 Recording to SD Card....................58 3‐11 SDHC..........................59 3‐12 Log ..........................62 3‐13 Device Info........................63 3‐14 Maintenance ....................... 64 3‐15 Language ........................65 4. Using SKYROS iView software ..................66 4‐1 Installing SKYROS iView Software .................
  • Page 7                                                                                                               DG-SC5800PI User Manual 5‐2‐2 Advanced Search ....................98 5‐2‐3 Event Search......................102 5‐2‐4 Video Playback..................... 106 6. Secureview Application for Android phones / devices ..........109 7. Secureview application for iPhones/ iPads ..............121 8 Appendix ........................132 8‐1 Specification ........................ 132 8‐2 Troubleshooting......................133 8‐3 Glossary ........................134          ...

  • Page 8: Product Information

    1. Product Information 1-1 Product Introduction DG-SC5800PI is a 3 Megapixel Outdoor bullet IP camera with IR LED and IR-cut Filter. This camera offers the latest compression technology with a CMOS sensor & a real time image processing hardware. With its high performance H.264 compression, users can stream high quality video at low bandwidth and storage capacity requirements.

  • Page 9: Safety Information

                                                                                                                  DG-SC5800PI User Manual 1-2 Safety Information In order to keep the safety of users and your properties, please follow the safety instructions as mentioned below. The warranty will become void if you disobey these safety instructions.  This Network IP Camera is sophisticated electronic device; DO NOT drop it from a height.

  • Page 10: System Requirements

    Before you start using this IP camera, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items:  DG-SC5800PI Megapixel Outdoor Bullet PoE IP Camera (1 No.)  Switching Power Adapter (12V DC, 2A) ...

  • Page 11: Get Familiar With Your New Network Outdoor Bullet Ip Camera

                                                                                                                  DG-SC5800PI User Manual 1-5 Get Familiar with your new Network Outdoor Bullet IP Camera   1  3  2    Item Description 1. Sun Shield Protects camera device body from sun light or rain directly. 2. I/O cable Includes (Refer to DI/DO PIN ASSIGNMENT for...

  • Page 12: Front View

                                                                                                                  DG-SC5800PI User Manual Front View                         Item Description 1. IR-LED Used for illumination assistance under night mode. 2. Day/night sensor Used for day/night detection and IR-L ED ON/OFF control 3. Lens Fixed focal length.      ...

  • Page 13: Top View

                                                                                                                  DG-SC5800PI User Manual Top View       Item Description 1. Screw Connects between camera device body & sun shield. 2. Sun Shield Protects camera device body from sun light or rain directly. 3. Camera device body IP camera metal case.

  • Page 14: Audio Output

                                                                                                                  DG-SC5800PI User Manual DI/DO PIN ASSIGNMENT   Item Description Blue, Sensor IN1, for alarm input, DV3.3Volt level allowed. Yellow, RS485 D- Orange, RS485 D+ Black, GND Green, Alarm out1, DV3.3Volt level allowed. DC12Volt/2A input Reset Button to be used when the IP camera is not functioning properly, You can...

  • Page 15: Installation Of The Network Ip Camera

                                                                                                                  DG-SC5800PI User Manual 1-6 Installation of the Network IP Camera Please follow the instructions mentioned below to setup your new IP camera. 1. Connect Ethernet cable to the LAN port.     2. Plug DC power adapter to the power outlet on the wall.
  • Page 16                                                                                                               DG-SC5800PI User Manual 4. If everything’s ok, you should see the left LED light on LAN port light up. If not, please recheck every step and try again, or ask your dealer of purchase for help.   Unplug the power then find the screws in the package, use screwdriver to fix the sun shield on the device’s main body.
  • Page 17                                                                                                               DG-SC5800PI User Manual 7. Power on the camera and refer to the following procedures to access and configure it. 8. If this IP Bullet camera is connected to a PoE switch then the device can be powered on without using the power adapter.

  • Page 18: Using Network Ip Camera By Web Interface

                                                                                                                  DG-SC5800PI User Manual 2. Using Network IP Camera by Web Interface 2-1 Locate the IP address of Network IP Camera You can use your new Network IP Camera by its web user interface via web browser. You must know the IP address of IP Camera before you can connect to it. The IP Camera will use DHCP server on your local network to obtain an IP address automatically by default.

  • Page 19: Web Browser

                                                                                                                  DG-SC5800PI User Manual Press ‘Discover’ button to search for all IP cameras on your local network (make sure all IP cameras are powered on and are connected to the local network first). When you find any IP camera, you can click on it and click ‘Link’ button to connect to it by your web browser.

  • Page 20: Connect To Ip Camera's Web User Interface

                                                                                                                  DG-SC5800PI User Manual 2.2 Connect to IP camera’s Web User Interface When you know the IP address of IP camera, you can connect to it by Internet Explorer web browser by entering its IP address in the address bar. The user login screen will appear when you get connected:  ...
  • Page 21                                                                                                               DG-SC5800PI User Manual For IE 8 version: Right click the indication bar and click: ‘‘Run Add-on” for All Users on this .  Computer to install ActiveX plugin   For IE9 Version:   Click ‘Allow’ button located at the bottom of IE to install ActiveX plugin.
  • Page 22                                                                                                               DG-SC5800PI User Manual If you’re prompted that Windows Firewall has blocked some features of this program as shown below.     Click ‘Allow access’ or IP Camera will not be able to function properly. When you’re installing Internet Explorer plug-in, you may also be prompted if you want to allow changes to be made to your computer:  ...
  • Page 23                                                                                                               DG-SC5800PI User Manual   Click ‘Run’ to install the Active X control. After ActiveX plug-in is installed, you should be able to see the video stream from camera. NOTE: If this is the first time you use this IP Camera, you can refer to chapter 2.4...

  • Page 24: Viewing Live Video

                                                                                                                  DG-SC5800PI User Manual 2-3 Viewing Live Video After ActiveX control is installed, you can view IP camera’s video by web browser. Just connect to IP camera by web browser and login, than you can see live video from IP camera: There are various controls on the web page;...
  • Page 25                                                                                                               DG-SC5800PI User Manual Available languages: English, Simplified Chinese, Traditional Chinese. Original size / Fit Switches live image view between original size (full screen size: 3M pixels) and fit screen (smaller size). If you want to see video in detail, switch to original size.
  • Page 26                                                                                                               DG-SC5800PI User Manual This function will enlarge video view digitally from 1X ‘ Enable Digital Zoom’ to 10X, so you can see objects in video in detail. button Note: Digital zoom uses computer algorithm to enlarge the video and some details may be lost.

  • Page 27: Client Settings

                                                                                                                  DG-SC5800PI User Manual 2-4 Client Settings In ‘Client Settings’ menu, you configure basic IP camera settings like data transfer protocol and data storage folder. To access ‘Client Settings’ menu, click ‘Client Settings’ button on the left of the web page as shown below.

  • Page 28: Advanced Configuration

                                                                                                                  DG-SC5800PI User Manual Here is the description of every setup item:   Item Description RTSP Select this option to use RTSP (Real-Time Streaming Protocol) to transfer video data. HTTP Select this option to use HTTP (Hyper-Text Transfer Protocol) to transfer video data.

  • Page 29: System

                                                                                                                  DG-SC5800PI User Manual The ‘Configuration’ submenu will appear, please pick a setup item you wish to configure. 3-1 System In this menu, you can configure basic IP camera settings like hostname and time.                         ...

  • Page 30: Daylight Saving

                                                                                                                  DG-SC5800PI User Manual Here is the description of every setup item:   Item Description Host Name Input the IP camera’s hostname here, it can be any meaningful words or characters that will help you to identify this IP camera. You can use IP camera’s...

  • Page 31: Security

                                                                                                                  DG-SC5800PI User Manual 3-2 Security   In this menu, you can configure IP camera’s login account. There are three kinds of accounts: Administrator (Can view IP camera’s video and make changes of camera setting) User (Can view IP camera’s video and see settings, but can’t make any change) Guest (Can view IP camera’s video only)
  • Page 32                                                                                                               DG-SC5800PI User Manual Here is the description of every setup item:   Item Description Password / Retype Password Input administrator’s new password in both ‘Password’ and ‘Retype Password’ field, and click ‘Modify’ button to (Administrator) change administrator’s password.

  • Page 33: Network

                                                                                                                  DG-SC5800PI User Manual 3-3 Network You can configure the network camera’s general and advanced network settings here. 3-3-1 General Setup Page Setup IP address for this IP camera. This IP camera supports both IPv4 and IPv6 IP address.
  • Page 34                                                                                                               DG-SC5800PI User Manual Static IPv4 / IPv6: Assign an IPv4 / IPv6 address to IP camera manually. If you don’t have a DHCP server on your local area network, you must use this option to specify an IP address.

  • Page 35: Advanced' Setup Page

                                                                                                                  DG-SC5800PI User Manual 3-3-2 ‘Advanced’ setup page You can setup advanced network settings in this page. This page is intended for advanced settings only, and this IP camera will work fine even you don’t make any changes to this page.
  • Page 36                                                                                                               DG-SC5800PI User Manual Multicast RTCP video port: Input port number for RTCP video here. Multicast audio port: Input port number for audio here. Multicast RTCP audio port: Input port number for RTCP audio here. Multicast TTL: Input TTL value for multicast here.

  • Page 37: Ip Filter

                                                                                                                  DG-SC5800PI User Manual 3-4 IP Filter When this IP camera is directly connected to Internet and not protected by firewall, this function acts like a mini built-in firewall to protect the safety of this IP camera and avoid attacks from hackers.

  • Page 38: Video

                                                                                                                  DG-SC5800PI User Manual Deny IP list It lists all IP addresses that cannot build connections to this IP camera. If you want to remove a set of IP addresses from the list, click on the IP address and click ‘Remove’ button.

  • Page 39: Image Setting

                                                                                                                  DG-SC5800PI User Manual 3-5-1 Image Setting You can adjust the image parameters in this page. Here is the description of every setup item:   Item Description Brightness / Control the image parameters. Click ‘-’ to decrease value, or click ‘+’...
  • Page 40                                                                                                               DG-SC5800PI User Manual Power Line Select the frequency of power line of the place you’re using this Frequency IP camera. This will help to reduce the flicker of certain lights in the image. Condition Select the condition that you’ll be using this IP camera from (AWB) dropdown menu.

  • Page 41: Video Setting

                                                                                                                  DG-SC5800PI User Manual 3-5-2 Video Setting You can adjust the video transfer parameters in this page.     Here is the description of every setup item: Item Description H.264 Select the compression of main stream: H.264 / MPEG4.
  • Page 42                                                                                                               DG-SC5800PI User Manual 1920x1080 (1080p) / 1280x960 (960p) 1280x720 (720p) / 720x480 (D1) 640x480 (VGA) / 320x240 (QVGA) ‐ MJPEG: 1280x720 (720p) / 720x480 (D1) 640x480 (VGA) / 320x240 (QVGA) NOTE: 2048x1536 (QXGA) video resolution is not displayed when video encoder is ‘MPEG4’.

  • Page 43: Overlay Setting

                                                                                                                  DG-SC5800PI User Manual 3-5-3 Overlay Setting   You can adjust the video overlay parameters in this page.   Here is the description of every setup item:   Item Description Enable Time Check this box to enable overlaying time stamp on video.
  • Page 44                                                                                                               DG-SC5800PI User Manual identify this IP camera. Click ‘Browse’ button to pick a picture on your computer, then click ‘Update’ button to use the picture. Please note that there are certain restrictions: 1) Select .bmp / .jpg / .jpeg image files only.

  • Page 45: Audio

                                                                                                                  DG-SC5800PI User Manual 3-6 Audio You can adjust audio input / output parameters here. Here is the description of every setup item: Item Description Enable Check this box to enable microphone. If you don’t want to hear Microphone voice from IP camera, you can un-check this box to disable it.

  • Page 46: Motion

                                                                                                                  DG-SC5800PI User Manual 3-7 Motion   This IP camera is capable to detect object’s motion, so IP camera will only record when there’s motion and save disk storage space. Motion detection is performed by examining the movement of objects in rectangular motion detection area.
  • Page 47                                                                                                               DG-SC5800PI User Manual - Move: Use the mouse to drag the title text. - Resize: Use the mouse to drag the four corners (upper- left/right, lower-left/right) to resize it. If you only want to adjust width or height, drag the four sidebars (top, bottom, left and right).

  • Page 48: Ptz Control

                                                                                                                  DG-SC5800PI User Manual 3-8 PTZ Control If you mount the IP camera on pan-tilt camera cradles that support pan-tilt control via RS-485 connection, you can use this function to control pan-tilt camera cradle so you can control the orientation of IP camera from remote place.
  • Page 49                                                                                                               DG-SC5800PI User Manual Here is the description of every setup item: Item Description Enable RS-485 Check this box to enable RS-485 functionality Use Pelco-D Select this option and RS-485 interface will output pan-tilt control signal in Pelco-D format. This format is widely accepted by most of pan-tilt camera cradles.

  • Page 50: Event

                                                                                                                  DG-SC5800PI User Manual 3-9 Event       When there’s an event, you can use this setup page to define what IP camera should do, like send an Email or trigger digital output to activate external alarm. There are three setup pages:  ...

  • Page 51: Settings

                                                                                                                  DG-SC5800PI User Manual 3-9-1 Settings This page lists all existing events. You can click ‘Modify’ button to edit an existing event, or ‘Remove’ to delete an existing event. To create a new event, just click “New” button to add an Event setting.
  • Page 52                                                                                                               DG-SC5800PI User Manual Item Description Enable Setting Check this box to enable this event. If you just want to disable this event temporarily, you can uncheck this box to disable the event without deleting it. Title Input any description text for this event so you can identify it quickly.

  • Page 53: Media

                                                                                                                  DG-SC5800PI User Manual 3-9-2 Media You can define what kind of media file should be saved to designated path.     Here is the description of every setup item:   Item Description One Snapshot Save a picture file when event is triggered.

  • Page 54: Event Server

                                                                                                                  DG-SC5800PI User Manual 3-9-3 Event Server You can define the details of remote media server: FTP (File), SMTP (Email), and Samba (File). A Samba server can be any computer running windows operating system with network neighbor function enabled. Many stand-alone network file servers also support samba server function.
  • Page 55                                                                                                               DG-SC5800PI User Manual Here is the description of every setup item:   Item Description Enable FTP Check this box to enable FTP server upload. Server - FTP Server: Input FTP server’s IP address or hostname. - Port: Input FTP server’s port number. In most cases it should be default value ‘21’.
  • Page 56                                                                                                               DG-SC5800PI User Manual - SMTP Server: Input SMTP server’s IP address or hostname. - Port: Input SMTP server’s port number. In most cases it should be default value ‘25’. - Sender Email Address: Input the sender’s email address that will appear in the Email sent by IP camera.
  • Page 57                                                                                                               DG-SC5800PI User Manual - Requires SSL Encryption: If your Email server requires SSL encryption, check this box. Please note that some Email server uses different port number than standard port 25 when SSL encryption is used. - STARTTLS: If your Email server requires STARTTLS encryption, check this box.

  • Page 58: Recording To Sd Card

                                                                                                                  DG-SC5800PI User Manual 3-10 Recording to SD Card When a SD card is inserted into IP camera, you can save video files on it. Note: 1. Be sure that the SD Card format should be FAT32. The NTFS format cannot be supported by this camera.

  • Page 59: Sdhc

                                                                                                                  DG-SC5800PI User Manual 3-11 SDHC This IP camera has an optional SD card slot for local storage. You can view the Recordings saved on SD card under this tab. There are three sub menus under this option as shown below: Status Under Status, it displays the capacity of inserted SD card.
  • Page 60                                                                                                               DG-SC5800PI User Manual Once the SD card is inserted, the Web Interface will display the capacity of SD card as shown below:- Recording: This tab will display the files stored by enabling “Recording to SD card” feature      ...
  • Page 61                                                                                                               DG-SC5800PI User Manual Click “All file” to list all files. You can also search the files depending on Time/ Date range. Event:        This tab will display the files stored by defining an Event triggered by Motion Detection/ Digital Input.

  • Page 62: Log

                                                                                                                  DG-SC5800PI User Manual 3-12 Log You can check the usage log of IP camera here.     In this page, you can click: 1. First page / Final page: Jump to first / final page of log. 2. Previous / Next: Jump to previous or next page of log.

  • Page 63: Device Info

                                                                                                                  DG-SC5800PI User Manual 3-13 Device Info You can check the information and network settings of this IP camera. This information is very useful when you need to repair or fix the problem of this IP camera. An example of device info page looks like this:      ...

  • Page 64: Maintenance

                                                                                                                  DG-SC5800PI User Manual   3-14 Maintenance You can do some maintenance job about this IP camera here.   Here is the description of every setup item:   Item Description Reboot Click this button to reboot the IP camera. This function is useful when you find IP camera is not working properly.

  • Page 65: Language

                                                                                                                  DG-SC5800PI User Manual 3-15 Language You can change the display language of web interface. Click ‘Language’ button and select one language. More languages may be available in the latest firmware file.              ...

  • Page 66: Using Skyros Iview Software

                                                                                                                  DG-SC5800PI User Manual 4. Using SKYROS iView software 4-1 Installing SKYROS iView Software The SKYROS iView software provides various functions like video recording. After this software is installed, you can use your IP camera to safeguard your property.
  • Page 67                                                                                                               DG-SC5800PI User Manual 2. Double click on ‘Setup.exe’ to install the ‘SKYROS iView’ software. The wizard as shown below will appear. 3. The screen as shown below will appear. Click ‘Next’ to continue.          ...
  • Page 68                                                                                                               DG-SC5800PI User Manual 4. Now, click on ‘Install’ as shown below. 5. Please wait while installation is being performed. This may take few minutes, please be patient.          ...
  • Page 69                                                                                                               DG-SC5800PI User Manual 6. Second part of installation will start automatically.                         7. A new setup window will appear, please click ‘Next’ button to continue.          ...
  • Page 70                                                                                                               DG-SC5800PI User Manual Now, click on ‘Next’ as shown below. The screen shown below will appear. Click on ‘Install’ as shown below.          ...
  • Page 71                                                                                                               DG-SC5800PI User Manual 10. Installation will take few minutes, please be patient. 11. Click ‘Finish’ when you see this message.          ...
  • Page 72                                                                                                               DG-SC5800PI User Manual 12. MSDE (Microsoft SQL Database Engine) installation procedure will start at the same time. Please wait until it completes. 13. Following screen will appear. Click on ‘Finish’. A new icon will appear on your computer’s desktop, you can double click on it to start SKYROS iView      ...

  • Page 73: 5 Getting Familiar With Skyros Iview Software

                                                                                                                  DG-SC5800PI User Manual 5 Getting familiar with SKYROS iView Software To start SKYROS iView, double click SKYROS iView icon on your computer’s desktop:   Or click ‘Start’ button of Windows, and select ‘All Programs’ -> ‘SKYROS iView- >Launch SKYROS iView’...
  • Page 74                                                                                                               DG-SC5800PI User Manual SKYROS iView login screen will appear as shown below. Default user ID is ‘admin’ and default password is none (leave it blank), click ‘OK’.   The main window of SKYROS iView will appear: EXIT  Date/Time, ...
  • Page 75                                                                                                               DG-SC5800PI User Manual The description of every item is listed below:   Item Description Split-screen mode SKYROS iView supports from 1 to 64 cameras split views. The video from IP camera will display in split screen display selector cells, and you can view up to 64 IP cameras at the same time.
  • Page 76                                                                                                               DG-SC5800PI User Manual background picture and select ‘Add Camera…’ A new window will appear: Select the camera you wish to add from ‘Camera’ dropdown list, and check the box ‘Image Lost’ and / or ‘Motion Detected’, then select the direction of camera icon, this will help you to remember the orientation of camera on the EMAP.
  • Page 77                                                                                                               DG-SC5800PI User Manual You can add more cameras to EMAP by repeating procedures listed above. Configuration Enter SKYROS iView configuration page. See next section for detailed instructions. Playback Playback recorded video. A new video playback window will appear. See section 5-2 for detailed instructions.
  • Page 78                                                                                                               DG-SC5800PI User Manual All camera’s video will be displayed in ‘Camera View’ area:   (This example picture shows a camera view with only 1 IP camera configured) To select an IP camera, click its video and it will be highlighted; some IP cameras support additional control, and a control panel will appear at the bottom right area of SKYROS iView.

  • Page 79: Configure Skyros Iview

                                                                                                                  DG-SC5800PI User Manual Auto Focus Click + or – to adjust the focus.    This function is only available for supported cameras. Cruise control Click ‘Go’ button to start camera cruise and click ‘Stop’ button to stop cruise. This function is only available for supported cameras.

  • Page 80: Device

                                                                                                                  DG-SC5800PI User Manual  Schedule (Configure schedule recording)  Event (Configure event recording)  Security (Configure SKYROS iView user list) Detailed description of every sub menu will be given in following sections. 5-1-1 Device You should configure at least one IP camera / video server before you can use SKYROS iView, and you can manage all IP camera / video server here.
  • Page 81                                                                                                               DG-SC5800PI User Manual If your IP camera is located on local area network, click ‘Search’ button. Wait for few seconds or few minutes until the search is complete, and all IP cameras found on your local area network will be listed:  ...
  • Page 82                                                                                                               DG-SC5800PI User Manual             Check ‘Enable Camera’ to enable this camera in SKYROS iView. If the IP camera you wish to add is not located on local area network, you have to input the details of IP camera manually:  ...

  • Page 83: Recording

                                                                                                                  DG-SC5800PI User Manual You can also manage the IP camera list by the following function:  Enable All: Enable all IP cameras in the list.  Disable All: Disable all IP cameras in the list.  Remove: Remove selected IP camera.
  • Page 84                                                                                                               DG-SC5800PI User Manual The description of every item is listed as follows:    Item Description Select Camera Please select an IP camera from the list to setup its recording behavior. SKYROS iView will attempt to connect to selected IP camera, if it’s not connectable, you will receive an error...
  • Page 85                                                                                                               DG-SC5800PI User Manual o add blocks, click + button; to erase blocks, click - button. Click ‘Reset’ button to reset motion detection blocks to default setting. You can also change the color of block if the color is similar to the IP camera’s video and its difficult for you to...

  • Page 86: System

                                                                                                                  DG-SC5800PI User Manual 5-1-3 System ou can configure system-wide configuration in this sub menu. he description of every setup item is listed below: Item Description Host Nam The host name by default is ‘SKYROS iView’. Camera Caption Add a text caption on camera view or not: ...
  • Page 87                                                                                                               DG-SC5800PI User Manual  Alarm Space: When data storage space is less than the size you specified here, you’ll receive an alarm message to notify that you should do something to prevent running out of storage space.  Locations: Lists all data storage space configured.
  • Page 88                                                                                                               DG-SC5800PI User Manual  Password: Input user’ s password.  Full screen view when auto login: Switch to full screen display mode when auto login. Alarm Transmitted Send an Email notification with p icture when alarm is triggered (motion is detected): email ...

  • Page 89: Schedule

                                                                                                                  DG-SC5800PI User Manual 5-1-4 Schedule   You can configure recording schedule in this sub-menu. When you enter this sub- enu for first time, click ‘Add Job’ button to add a new schedule recording job:        ...
  • Page 90                                                                                                               DG-SC5800PI User Manual new window will appear on the right:     You can configure a new schedule recording job here. The description of every setup item is listed below:   Item Description Weekly Schedule Select the time period in a week of this schedule. There are total 48 x 7 blocks in a week schedule, where every block represents half an hour.
  • Page 91                                                                                                               DG-SC5800PI User Manual In order to start the schedule recordings click the schedule button on the main screen of th e software. Events Select the event to trigger recording: Round-The-Clock: Recording is time activated (according to chedule). Motion Det ection: Recording is motion-activated.

  • Page 92: Event

                                                                                                                  DG-SC5800PI User Manual 5-1-5 Event SKYROS i View can send you an alarm email message so you can know something happened on the IP camera (motion detected, video lost, or connection lost). A sound can be played to notify the operator at the computer where SKYROS iView is installed, too.
  • Page 93                                                                                                               DG-SC5800PI User Manual detected at this IP camera.  Video lost: Alarm will be triggered when video server’s external camera signal is lost.  Connection Lost: Alarm will be triggered when network connection to this IP camera is lost.

  • Page 94: Security

                                                                                                                  DG-SC5800PI User Manual 5-1-6 Security You can add or remove users which are allowed to access SKYROS iView.                     here are two kinds of users in SKYROS iView: Administrator and user.
  • Page 95                                                                                                               DG-SC5800PI User Manual lease input the same password in both fields for confirmation. o add a user, click ‘Add’ button, a new window will appear on the right:     he description of every setup item is listed below:...

  • Page 96: Video Playback

                                                                                                                  DG-SC5800PI User Manual Multi-Camera View Ope ration: Allows multi-camera view. amera Map Operation: Allows viewing of E-MAP. cheduling: User can start or stop schedule recording. ecording: User can start or stop video recording. layback: User can playback saved video.
  • Page 97                                                                                                               DG-SC5800PI User Manual A new window will appear: T play a recorded video, you can use one of following two functions:     Advanced Search      Event Search                 Please refer to following c Please refer to following c hapters for detailed instructions of every search mode.

  • Page 98: Advanced Search

                                                                                                                   DG-SC5800PI User Manual 5-2-2 Advanced Search ou can search for recorded video within specific time period, and get a list of record odes of all IP cameras.                    ...
  • Page 99                                                                                                               DG-SC5800PI User Manual When you finish, click ‘SEARCH’ button to search for recorded video, and you will get a similar output like this:   In this picture, a recorded video of ‘Camera 1 ’ has been found at 12 o’clock. A blue ark indicates it’...
  • Page 100                                                                                                               DG-SC5800PI User Manual Blue: Manual Recording reen: Recording is triggered by motion Red: Recording is triggered by Digital Input To view the video, check the box of camera ID, then click ‘Play’ button.              ...
  • Page 101                                                                                                               DG-SC5800PI User Manual And the video will be prepared for playback. Recorded Video Clip      For instructions of video playback, please see section 5-2-4 for detailed instructions.                ...

  • Page 102: Event Search

                                                                                                                  DG-SC5800PI User Manual 5-2-3 Event Search You can search for video for playback by triggering event: round the clock, motion detection, or digital input.          ...
  • Page 103                                                                                                               DG-SC5800PI User Manual To search for video, you have to specify: 1) Starting and Ending time for video searching in ‘Start time’ and ‘Stop time’ field. HOUR IN A DAY  DATE  2) Recording mode: Round Clock, Motion Detection and I/O Mode (Digital Input).
  • Page 104                                                                                                               DG-SC5800PI User Manual When you finish, click ‘Search’ button to search for recorded video, and a list similar to this will appear: RECORDED VIDEO  FILES  You can select the video clip you wish to play, and click ‘Play’ button.      ...
  • Page 105                                                                                                               DG-SC5800PI User Manual For instructions of video playback, please see section 5-2-4 for detailed instructions.          ...

  • Page 106: Video Playback

                                                                                                                  DG-SC5800PI User Manual 5-2-4 Video Playback When a video is loaded, the video playback screen will look like this:   The description of every item is listed as below:   Item Description Close Window Click X mark to close video playback window.

  • Page 107: Speed Control

                                                                                                                  DG-SC5800PI User Manual Stop video playback Skip to previous video frame Skip to the beginning position of video Speed Control When video is stopped, you can click + or – button to adjust video playback speed: from 1/4 to 4x speed.
  • Page 108                                                                                                               DG-SC5800PI User Manual To go back to previous menu, click ‘Cancel’. Click ‘Reset’ to reset image parameters back to default value. Time Displays the current time. Displays video zoom in, Displays video zoom out.        ...

  • Page 109: Secureview Application For Android Phones / Devices

                                                                                                                  DG-SC5800PI User Manual 6. Secureview Application for Android phones / devices To Install Secureview IP camera utility on Android device, follow the below mentioned instructions: Step1: To install Secureview application, launch ‘Market/ Play Store’. (In your Android device’s ‘All apps’ menu:...
  • Page 110                                                                                                               DG-SC5800PI User Manual You should be able to search the Secureview App (If not, please chec k the spelling again). Step3:   Tap on the “Install” button to download & install Skyros iView App.          ...
  • Page 111                                                                                                               DG-SC5800PI User Manual p4: Once you tap Install, Android will prompt you to confirm installation, please p “Accept & Download” button below to start installation. Please be patient while the application is getting installed.          ...
  • Page 112                                                                                                               DG-SC5800PI User Manual Once the application is installed, tap on “Open” to launch the Secureview utility. You can also launch the ‘Secureview’ APP from the ‘All Applications’, please refer the below screen for more detail.          ...
  • Page 113                                                                                                               DG-SC5800PI User Manual tep5: Launch the utility by clicking on Secureview icon in the menu option. Step6: Tap on “Add” to add the connected Digisol IP cameras.            ...
  • Page 114 DG-SC5800PI User Manual Ensure that your Android device is wirelessly connected to same wireless access point to which the DIGISOL IP camera’s are connected. In this page, you need to input the IP camera’s parameters manually: Name: You can define a name for this IP camera for easy identification.
  • Page 115                                                                                                               DG-SC5800PI User Manual Click OK. Then click on “Add Device”. It will direct you to the device settings screen as shown below:-   Click on “Save” to apply the settings or click on “Cancel” tab.          ...
  • Page 116                                                                                                               DG-SC5800PI User Manual When an IP camera has been added successfully, it will be listed under Device List. List: Displays the added IP cameras under Device List. ap: Displays a Map window. o view the video, click on the desired camera. You can view one camera at a time using this application.
  • Page 117                                                                                                               DG-SC5800PI User Manual The following icons will be disp layed on the bottom of the screen: 1. PTZ: Tap this option to show the PTZ controls for PTZ supported IP cameras. For n on-supported IP cameras, this tab will be grayed out.
  • Page 118                                                                                                               DG-SC5800PI User Manual Home: Tap this option to move the IP camera to Home position (as defined in the Web GUI of an IP camera). Preset: Tap this option to move the IP camera to desired preset point defined in an IP camera.
  • Page 119                                                                                                               DG-SC5800PI User Manual Snap: Tap this option to take a snap of the current view of an IP camera. To go back, click on “Device List” tab on the upper-left corner of this utility. To Edit/ modify the settings of an added IP camera, Click on arrow mark in front of the desired IP camera:              ...
  • Page 120                                                                                                               DG-SC5800PI User Manual Click “Done” to apply the changes. It will direct to main interface. To exit the Application, click on back button of your phone in the main interface of Secureview utility.          ...

  • Page 121: Secureview Application For Iphones/ Ipads

                                                                                                                  DG-SC5800PI User Manual 7. Secureview application for iPhones/ iPads To Install SecureviewIP camera utility on Apple device, follow the below mentioned instructions: Step1: To install Secureview application, launch “App Store” (In your Apple device tap ‘All Apps’ menu).
  • Page 122                                                                                                               DG-SC5800PI User Manual You should be able to find the Secureview App (If not, please chec k the spelling again). Step3: Tap on the “Install” button to download & install Secureview App. Please be patient while installing Secureview Application.
  • Page 123                                                                                                               DG-SC5800PI User Manual Step4: Once the application is installed, tap on “Open” to launch the Secureview App. You can also launch the ‘Secureview’ APP from the ‘All Applications’, please refer the below screen for more detail.        ...
  • Page 124 If you are using an iPad, go to “App Store” & input “Secureview” in Search Field. Th following screen will be displayed: Under “iPhone Apps”, Secureview application will be listed. Click on it to install the utility on an iPad. Step5: Tap on “+” sign to add the connected Digisol IP cameras.          ...
  • Page 125                                                                                                             DG-SC5800PI User Manual Ensure that your Apple device is wirelessly connected to same wireless access point to which the DIGISOL IP camera ’s are connected. In this page, you need to input the IP camera’s parameter manually: Name: You can define a name for this IP camera for easy identification.
  • Page 126                                                                                                               DG-SC5800PI User Manual List: Displays the added IP cameras under Device List. Map: Show the current location. NOTE: To view the video of an IP camera on Apple devices, kindly make sure that 3GPP protocol is enabled on an IP camera.
  • Page 127                                                                                                               DG-SC5800PI User Manual Under Configuration>>Video>>Video Setting: Under Mobile View: Enable “3GPP with audio” to get the real time audio & video while streaming on an iPad / iPhone using Secureview App. To view the video, click on the desired camera. You can view one camera at a time using this application.
  • Page 128                                                                                                               DG-SC5800PI User Manual The highlighted icons are for future update. The arrows indicate the directions to Pan/ tilt the IP camera. Home: Tap this option to move the IP camera to Home po sition.   (as defined in the Web GUI of an IP camera).
  • Page 129                                                                                                               DG-SC5800PI User Manual 5. Zoom: Tap this option to enable the digital zoom. Snap: Tap this option to take a snap of the current view of an IP camera. To go back, click on “Device List” tab on the top left corner of this utility.
  • Page 130                                                                                                               DG-SC5800PI User Manual Click on “Edit” tab on top right corner & make the modif ications. It will display the screen below: Click on Save to apply the changes or else tap cancel button. To remove/delete an IP camera, tap and hold the desired cam era in the list.
  • Page 131                                                                                                               DG-SC5800PI User Manual You can also click “Edit” tab on the upper left corner under Cameras tab to remove/ delete the IP cameras:- You can view one camera at a time using this application .          ...

  • Page 132: 8 Appendix

                                                                                                                  DG-SC5800PI User Manual 8 Appendix 8-1 Specification Image Sensor: 1/2.5" Mega pixel Color CMOS sensor Max Resolution: 2048 x 1536@20fps Min. Illumination: Color : 1 Lux / F1.2 Lens: Built-in Lens Video Compression: H.264, MPEG-4, MJPEG Image resolution: QXGA (2048 x1536): 20 fps...

  • Page 133: Troubleshooting

                                                                                                                  DG-SC5800PI User Manual 8-2 Troubleshoo ting Please don’t panic when you find that this IP camera is not working properly. Before you send this IP camer a back to us, you can do some simple checks to save your time:...

  • Page 134: Glossary

                                                                                                                  DG-SC5800PI User Manual 8-3 Glossary MJPG : Motion JPEG or M-JPEG is a digital video sequence that is made up of a series f individual JPEG images. (JPEG stands for Joint Photographic Experts Group). The quality of t...
  • Page 135                                                                                                               DG-SC5800PI User Manual legitimate users to send email while denying the service to unauthorized users, such as spammers. FTP (File Transfer Protocol): FTP is an application protocol that uses the TCP/IP protocols, used to exchange files between computers/devices on networks. Network cameras with embedded operating systems use FTP to send camera images to an authorized user’s computer or web site.
  • Page 136                                                                                                               DG-SC5800PI User Manual Frame Rate: The frame rate is used to describe the frequency at which a video stream is updated is m easured in frames per second (fps). If you want more accurate video then the ame rate should be kept high. Lower the frame rate, lesser the image details.
  • Page 137                                                                                                             DG-SC5800PI User Manual Day/Night function DG-SC5800PI has an array of IR LEDs for better visibility under no light environment. If the environment light is not sufficient enough to view the ca mera then e IR LEDs are triggered automatically for better visibility.

Table of Contents