Digisol DG-SC6820VPIE User Manual page 80

Table of Contents

If a wireless IP Camera needs to be visited via WiFi mode, user should set [WiFi

Configure] correctly.

Setup steps:

Step 1: Login IP Camera via IE browser (192.168.1.10 by default);

Step 2: Switch to the [Network Configure] page, fill in the device IP address assigned by

network administrator, e.g. 192.168.1.100;

Step 3: Fill in the correct net mask, e.g. 255.255.255.0;

Step 4: Fill in the correct gateway, e.g. 192.168.1.1;

Click OK button to save the setting, then restart the device, enter the device IP

address to visit it.



Dynamic IP

Dynamic IP means that IP Camera obtains IP address from DHCP server

automatically. See picture below for the network topology:

IP Camera User Manual

Fig 5-12

Fig 5-13

Table of Contents