Table of Contents
Advertisement
[Capture]: Linkage capture and store in the SD card when alarm is triggered.
[E-mail]: Enable this function, the information of I/O alarm will be sent to mailbox (refer to
E-mail Configure). The notification email can contain text messages and images.
[FTP]: Enable this function, the information of I/O alarm will be saved in FTP Server. User
can upload text messages and images.
Click OK button to save the setting; when the setting is not saved, click "Refresh"
button to return to the previously saved parameters; when the setting has been saved,
click "Refresh" button to query whether the setting is successful.
3.5.10 Advanced Configure
3.5.10.1 Capture Configure
The interface of capture configure is shown in Fig 3-20:
[Setting]: Enable or disable timing capture function; set the time interval of capture, time
range: 5/10/15/30/60s. If capture interval is set to 5s, IP Camera will capture pictures
every 5 seconds in the period of capture schedule, and store them in the SD card.
[Capture Schedule]: Enable this function, user can set a daily schedule of capture. The
IP Camera User Manual
Fig 3-20
29
Advertisement
Table of Contents
