Table of Contents
Advertisement
3.5.10.12 Day/Night Configure
The interface of day/night configure is shown in Fig 3-30:
[Day/Night Switch Schedule]: Enable this function, user can set a daily schedule of
switch. The start time should be earlier than the end time. You can copy and apply time
settings to the other date or every day. Click OK button to save your settings, click Refresh
button to update the schedule.
[Sensitivity]: Set the sensitivity of sensor in low-light conditions: high, normal, low.
Click OK button to save the setting; when the setting is not saved, click "Refresh"
button to return to the previously saved parameters; when the setting has been saved,
click "Refresh" button to query whether the setting is successful.
IP Camera User Manual
Fig 3-30
40
Advertisement
Table of Contents
