Wireless ip surveillance pan/tilt camera (18 pages)
Summary of Contents for Digisol SKYROS SERIES
Page 1
SKYROS SERIES Megapixel Bullet IP Camera V1.0 2016-08-11...
Page 2
Please check with your local distributors for latest information. No part of this document can be copied or reproduced in any form without written consent from the company. Trademark DIGISOL is a trademark of Smartlink Network Systems Ltd. All other trademarks are the property of the respective manufacturers.
Product Overview DIGISOL Bullet IP Camera are HD Resolution camera with IR LED and IR-cut Filter. This camera offers the latest compression technology with a CMOS sensor & a real time image processing hardware. With its high performance H.264 compression, users can stream high quality video at low bandwidth and storage capacity requirements.
Product Features CMOS Sensor Support HD resolution at 25fps Support H.264 compression Fixed / Vari-Focal Lens Night Vision IR-CUT filter for true day/ night functionality ONVIF Compliant XMeye App for Apple iOS & Android Phones/ Tabs System Requirements The following system requirements are recommended: ...
Page 5
Camera Installation - Hardware Please follow the instructions mentioned below to setup your new IP camera. Connect Ethernet cable to the LAN port. DC Power Input Ethernet Port Plug DC power adapter to the power outlet on the wall. Connect DC power cable to IP Camera’s DC power connector.
Page 6
Insert the set up CD into your CD ROM drive of notebook/desktop computer. Run the ‘General_Digisol_CMS Setup.exe’ file program. The wizard as shown below will appear. The screen as shown below will appear. Click ‘Next’ to continue.
Page 7
Click Next & browse the location. Proceed by clicking Next to finish the installation.
Page 8
Please wait while installation is being performed. This may take few minutes, please be patient. A new icon will appear on your computer’s desktop, you can double click on it to start CMS.
Page 9
Web Management of the Camera You must know the IP address of IP Camera before you can connect to it. By default the IP camera is on Static IP & default IP address is 192.168.1.10. Connect the camera to router or a switch & set it on DHCP. ...
Page 10
IP Camera’s administrator username and password are admin & blank’ (lower case) by default. Click ‘OK’ button or press ‘ENTER’ key on your keyboard when you finish entering username and password. When you connect to IP Camera for the first time, you’ll see the following message. This message prompts you to install Active-X plugin before you can see the video from IP Camera.
Page 11
Click ‘Run’ to install the plug-ins.It will display the following window: Click on ‘Next’ to proceed the plug-ins installation. Once the plug-ins are installed, it will display the following screen:-...
Page 12
Login to IP Camera Web GUI. The following screen will be displayed:...
Page 14
If you're trying to connect to the IP camera from Internet, please make sure the port that IP camera uses is not blocked by firewall or other software / hardware. Contact DIGISOL helpdesk, if above solutions do not work. 2. Image refreshes very slowly.