Digisol DG-SC6820VPIE User Manual page 81

Please refer to picture below for the network settings:
Setup steps:
Login IP Camera via IE browser, switch to the [Network Configure] page and tick off
DHCP, click OK button to save the setting, and restart the device to make the parameters
valid.
2. Internet (WAN)
There are three ways to connect IP Camera to Internet:
1) Fixed IP mode;
2) Broadband and router sharing Internet access mode (dynamically obtain extranet IP
address mode) like ADSL and so on;
3) PPPoE dial-up access mode.
After IP Camera is connected to Internet, remote Internet users can visit it directly via
domain name or IP address.
 Fixed IP mode
See picture below for the network topology:
IP Camera User Manual
Fig 5-14
80