Table of Contents
Advertisement
3.5.3 Time Configure
The interface of time parameters is shown in Fig 3-11:
[Time Setting]: Manually set the date and time of device.
[Time zone]: Set the current time zone.
[Daylight Saving Time]: User can enable this function, and set start & end time and shift
time.
[NTP Service]: Enable this function, IP Camera will sync system time with NTP server
according to the time zone; user can also manually set the IP and port number of NTP
server.
[Sync PC time]: Click this button to sync system time with PC.
Click OK button to save the setting; when the setting is not saved, click "Refresh"
button to return to the previously saved parameters; when the setting has been saved,
click "Refresh" button to query whether the setting is successful.
IP Camera User Manual
Fig 3-11
19
Advertisement
Table of Contents
